Ha-Be Dust Collector 100

Polymeric layer for reducing dust emissions

Item No. 3800/E

FIELDS OF APPLICATION

Ha-Be Dust Collector 100 is designed to create a polymeric layer on bulk materials such as coal, coke, ores, sulfur, sludge, earth, sand, fertilizers and solid waste in order to prevent dust losses and emissions in industrial warehouses and open storage areas, especially in windy and dry areas.

Ha-Be Dust Collector 100 can also be applied to open roads to reduce dust emissions and to material being transported in open wagons (e. g. material transports over long distances).

The surface of the treated material is solidified and dust emissions can be dramatically reduced in both discontinuous surface crusting and continuous dust binding (“knock down”) applications.

Ha-Be Dust Collector 100 offers an excellent cost /performance ratio.

WORKING PRINCIPLE

Ha-Be Dust Collector 100 penetrates and solidifies the surface of the treated material. Maximum efficiency is obtained after drying of the treated material, which usually takes 30 minutes to a few hours depending on weather conditions.

In continuous spray applications, airborne dust is immediately bound and settled.

DOSAGE | APPLICATION QUANTITY

The dosage depends on the type of treated material, prevailing weather conditions and the type of application procedure.